Four heavy-duty valve springs with retainers on a wooden table, automotive art in background, Eastwood Engineering UK performance parts.

Porsche 718/981 Cayman GT4 Track Spring Kit

718
£650.00
Skip to product information
Four heavy-duty valve springs with retainers on a wooden table, automotive art in background, Eastwood Engineering UK performance parts.

Porsche 718/981 Cayman GT4 Track Spring Kit

£650.00
Spring Spec

After 10,000 miles of driving, 20+ track days, and extensive testing at the Nurburgring we've concluded that this is the best spring rate setup for these cars.

We use slightly different spring rates for the 981 and 718 GT4 due to their differences in overall mass. However, the rates can also be customised depending on the customer’s use case—whether it's a Clubsport build or a fully stripped track car.

Why Stiffer Springs?

Through testing various spring rates, we found that our cars exhibited significantly less chassis yaw versus damper movement under high-load conditions—primarily during high-speed cornering and heavy braking.

All testing was carried out using track-oriented tyres such as the Nankang CRS, Yokohama AD09/52, and Vitour Tempesta P1 in various sizes. In these setups, the Porsche Cayman GT4 was able to generate up to 1.7G of lateral force!

What Does This Do?

By increasing the spring rate, we've been able to better control chassis yaw under high-load conditions. This results in greater driver confidence by reducing body roll and minimising front-to-rear load transfer during heavy braking—an issue that can often cause nervousness when driving at the limit.

Customer Feedback

Our customers have reported that, with the spring kit fitted, their GT4s feel more complianton the road. This is largely due to the car bobbing and bouncing less under compression and riding the bump stops less often, as it now sits higher in its suspension travel.

Package Includes

2 x Front main springs

2 x Front helper springs + adapters

2 x Rear main springs + adapters

OEM factory rear helper springs (re-used)

Designed to work with OEM electronic dampers

No modifications required to wheel arch liners

Fits factory top mounts


  

Aftermarket Product Use & Vehicle Liability Disclaimer

All products supplied by Eastwood Engineering, including exhaust valve controllers and electronic control modules, are designed for off-road, track, or show use only. In some regions, these products may not meet emissions standards, noise limits, or road-use regulations.

By purchasing and installing any product from Eastwood Engineering, you acknowledge and accept responsibility for:


  • Making sure the product is used in line with all relevant local, national, and international laws and regulations.

  • Any changes made to your vehicle and how they may affect performance, safety, drivability, and emissions.

  • Any potential impact on your vehicle’s warranty, insurance, and resale value.

Eastwood Engineering cannot be held responsible for any damage, malfunction, fines, losses, injuries, or legal issues that may result from the purchase, installation, or use of our products. All products are installed and used at the customer’s own risk.

For best results and peace of mind, we strongly recommend professional installation by a qualified technician.